Using steel wool on your Maplewood fretboard can damage it. Related Questions Can I clean my Maplewood fretboard the same way I clean my rosewood fretboard? As a last touch, take a lint less, or microfiber clothe with a dab of polish compound. Unlike cleaning, you want to work along the frets. How rough to start really depends on the condition of the frets. A few options include, Dry Steel Wool, sand paper of 2000 grit or higher or fret rubbers. As with any polishing job, with whichever fine abrasive you are using, you will start with the relatively lower grit and work up to ultra-fine. At this point we don’t want to touch the wood board itself so either use a metal fret protector, or masking tape to cover it. Since we already went over the frets with 0000 steel wool, they may be very close to shiny already. We are not talking about fret leveling or dressing, this is just a polish. There are several technics to polish frets, all aiming at the same result, smooth shining frets. Polished frets not only look great, they are also going to be more comfortable to play and certainly smoother for bends. You’ll know that you’re going to need to condition your fretboard soon if you’re running your hands up and down the fretboard and the fret wire feels jagged and almost sharp Too much lemon oil will make your fretboard feel sticky.Ī fretboard that is dried out and cracked can lead to your binding coming loose or lead to fret wire becoming loose. A little goes a long way so do not be extra generous. Pour some lemon oil on a towel and then rub it onto your fretboard following the grain. Do avoid furniture lemon oil on your fretboard because it contains unwanted additives that may damage your instrument. They are all OK and it’s up to your, preferences and budget to decide. There are different types and grades to lemon oil, some smell better, some are more natural, some are ‘for guitars’ and some are thinner than others. Lemon oil soaks into the wood and makes it look as good as new. However, lemon oil can bring back the shine to your rosewood fretboard. Using wood oil soap can make your fretboard look dull and take away the natural luster. There is no need to fret about a grimy fretboard because with a few tips, you will be able to have a beautiful guitar begging to be played. The moisture, acids, and salts in sweat cause the wood around the frets to deteriorate, poorly cleaned frets will develop green corrosion all over the fret wire, and when the sweat evaporates, it dries out the wood and even cause the fretboard to crack. Rosewood boards are usually unfinished and it is important to pay more attention to them. To properly clean it, you will need to unstring the guitar, protect the sensitive areas, remove the dirt, condition and polish, and restring the guitar.Ī guitar needs to be cleaned particularly because over time, dirt, sweat, and dead skin accumulate on the fretboard, the frets, and the guitar strings. From sweat dirt and grime accumulating on the frets and corroding it, to cracked wood and falling frets due to the wood drying.Ĭleaning a rosewood fretboard without damaging it can be done using wood oil soap, steel wool, lemon oil, and a towel. A dirty fretboard isn’t just unattractive, over time it can actually damage the wood and even effect the performance.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |